NB Quality Catalogue ENG 2020

69 68 Long-lasting lubricating oil for food industry Food Durable Lube is a fully synthetic ester oil-based long-lasting food industry grease. The product has outstanding thermal, hydrolytic and oxidation stability, low oil mass loss at high temperatures, good carrying abilities, water repellency and corrosion resistance. Thanks to the fully synthetic base oil, the product can withstand temperatures between -35 °C and + 250 °C. General information Food Durable Lube is suitable for lubricating chains, conveyors, open mechanisms, screws, hinges, sliding surfaces, rails and ropes operating in difficult conditions and in a very variable temperature range. Base substances fully synthetic ester oil blend, EP, AW and AC additives Colour transparent, yellowish Odour typical Synthetic base oil viscosity at 40 °C 320 cst Temperature resistance -35°C to +250°C Water resistance good Load resistance very good Shell 4-ball test (IP239) 2000Nm NSF class H1 Density 0,69g/ml Technical information Applications Instructions for use • Outstanding stability • Good lubricity • High load resistance • NSF class H1 • Temperature resistance -35 °C to +250 °C • Biodegradable • Temperature range for storing, transportation and use is +5 ºC up to +45 ºC. • Shake the aerosol well before use. • If possible, clean the mechanisms before lubrication. • Spray the product evenly on the surface from a distance of 25 cm. • The product can only be sprayed by holding the aerosol upright or upside down. • Allow the solvent in the product to evaporate before assembly. Product and accessories Lubricating oil for food industry Food PTFE Fluid is an H1 pharmaceutical multifunctional lubricating oil that does not contain resins or acids. The product has good carry- ing properties, surface cleaning properties, good lubricity, low internal resistance and rust dissolving ability. Due to the different composition and PTFE additives, the product can withstand moderate loads and temperatures between -25 °C and + 120 °C.The product has an H1 food industry certificate. The product is suitable for use in the food industry, pharmaceutical and catering companies. Suitable for lubricating sliding surfaces, rails, locks, shafts, screws, hinges and other fine mechanisms. Base substances pharmaceutical oil, PTFE, additives Colour transparent Odour typical NSF class H1 Load resistance 4-Ball (IP239) 600Nm Base oil viscosity (cst) 16 Temperature resistance -25 °C to+120 °C Density 0,724g/ml • Good carrying properties • Good lubricating properties • Low internal resistance • Multifunctional • Temperature range for storing, transportation and use is +5 ºC up to +45 ºC. • Shake the aerosol properly before use. • Make sure before spraying that the surface is clean. • Spray the product evenly on the surface from 25 cm distance. • Let the solvent contained in the product to evaporate and then assemble the parts. FOOD PTFE FLUID Food industry Food industry FOOD DURABLE LUBE Product Product Product Product Product Product Food PTFE Fluid 500ml NBQ229050 L85 Food Industry 4742628003563 Auxiliary products Power Clean K1 500ml NBQ494050 C95 Food Industry 4742628002399 Product Product Product Product Product Product Food Durable Lube 500ml NBQ240050 L83 Lubrication 4742628003860 Auxiliary products Power Clean K1 500ml NBQ494050 C95 Food Industry 4742628002399 Technical information Applications Instructions for use Product and accessories General information