NB Quality Catalogue ENG 2020

67 66 Food grade multifunctional oil Food Multi Oil Food industry Food Multi Oil is multifunctional lubricant for different fine mecha- nisms. Product is based on the mixture of oils, antioxydants, addi- tives, solvents and the mixture of gases. Food Multi Oil is suitable for lubrication, rust releasing and opening stucked joints like bolts, pins, etc. Product can be used also for clean- ing different materials: plastic, rubber, metal, etc. Food Multi Oil has good protective properties against moisture. General information FoodMultiOilhaswideusageapplicationsinelectriccomponentsmaintenance(plugs,contacts, etc) andmechanical maintenance(bolts, locks, hinges, slideways, pins, etc). Due togood clean- ing properties of the product, it is suitable also for cleaning tar stains, heavy greases and oils. NB! Not to use in the applications with medium or high loads! Base substances mineral oils, hydrocarbonates Colour transparent, slightly yellowish Odour typical Copper corrosion test 1b (ISO2160/ASTM D4048) Temperature resistance -5 ºC to +55 ºC Load resistance low NSF class H1 Density 0,805g/ml Technical information Applications Instructions for use Product and accessories • NSF H1 class • Good penetration properties • Multifunctional • Longlasting • Temperature range for storing, transportation and use is +5 ºC up to +40 ºC. • Make sure the surface is clean before spraying. • If necessary, clean the surface with Power Clean K1. • Spray the product evenly on the surface at a distance of 25 cm. • The product can only be sprayed by holding the aerosol in an upright position. • Allow the solvent in the product to evaporate and then reassemble the parts. Food industry Stainless cleaning agent for food industry InoxClean is a stainless surface cleaner that contains high-quality pharmaceutical oil. InoxClean leaves stain- less surfaces slightlygreasy toprotect thesurfaces fromfingerprintsandkeep thesurfaces inauniformpattern. The main uses of Food Inox Clean are in industries where a lot of stainless is used: elevators, food industry, kitchens, stairs, etc. The product is suitable for cleaning various matte and glossy stainless surfaces to remove fingerprints, lighter grease and other dirt. The main uses of Food Inox Clean are in industries where a lot of stainless is used: elevators, food industry, kitchens, stairs, etc. Base substances pharmaceutical oil, solvents Colour valge vaht Odour typical NSF class A7 Density 0,84 g/ml • Good cleaning properties • Polishes surfaces • Pleasant odour • Easy to use • NSF A7 registration • Temperature range for storing, transportation and use is +5 ºC up to +40 ºC. • Shake the aerosol properly before use. • Spray the product evenly on the surface from 25 cm distance. • Clean the surface and polish it with a soft cloth. • In case of heavy dirt, repeat the procedure. Product Product Product Product Product Product Food Inox Clean 500ml NBQ479050 C97 Cleaning 4742628003877 FOOD INOX CLEAN Product Product Product Product Product Product Food Multi Oil 400ml NBQ227040 L94 Food Industry 4742628002153 Auxiliary products Power Clean K1 500ml NBQ494050 C95 Food Industry 4742628002399 Technical information Applications Instructions for use Product and accessories General information