mm: 10,0 mm: DG10 zzzzz{ zzzzzz DG15 zzzzz{ zzzzzz <– 230 mm –> 300 mm 80 m/s EN 2024/2025 service@rhodius.eu www.rhodius-abrasives.com +49 2636 96910-6111 +49 2636 96910-2400 The extra-thin DG10 was specifically developed for dry cutting and offers a maximum of performance and precision on a wide range of materials. This enables extremely short cutting times and very clean cutting edges. At the same time, dust generation during dry cutting has been further reduced with the DG10. • Low dust generation • Continuous turbo rim enables high cutting speed • Narrow cut width for exact cuts and clean cutting edges • Usable for a wide range of materials • Developed for dry cutting Lifetime Cutting ability Straight With a segment width of 1.4 mm, the DG15 is able to achieve very high cutting speeds. Due to the special diamond bond within the 10 mm high segments, it is particularly suited for cutting high-fired tiles, stoneware and ceramics. In this area, it shows its full potential and also excels with very low dust generation during dry cutting. With its reinforced steel core, the DG15 ensures a precise cut and clean cutting edges. • 10 mm high segments • Low dust generation • Optimised diamond bond for hard tiles, ceramics and fine stoneware • Reinforced steel core ensures a precise cut and a clean cutting edge • 1.4 mm segment width for a high cutting speed • Wet and dry cutting Lifetime Cutting ability Straight DG10 A U V N Product category GTIN/pc. EAN/pc. 115 × 10.0 × 1.4 × 22.23 13300 1 303606 PK10 4011890082256 125 × 10.0 × 1.4 × 22.23 12250 1 303754 PK10 4011890087695 230 × 10.0 × 2.0 × 22.23 6650 1 303607 PK10 4011890082263 300 × 10.0 × 2.2 × 25.40 6400 1 303608 PK10 4011890082270 350 × 10.0 × 2.4 × 25.40* 5500 1 303609 PK10 4011890082287 *Reducer ring to hole diameter of 20.00 mm included in each packing unit. DG15 A U V N Product category GTIN/pc. EAN/pc. 115 × 10.0 × 1.4 × 22.23 13300 1 303900 PK10 4011890097670 125 × 10.0 × 1.4 × 22.23 12250 1 303870 PK10 4011890095638 228
RkJQdWJsaXNoZXIy NTYxNjk=