NB Quality Catalogue ENG 2020

107 106 STRONG DOUBlE-SIDED TRANSPARENT ADHESIvE TAPE STRONG TAPE TRANSPARENT TAPEs TAPEs Strong Tape Transparent is a transparent, strong, double-sided purely acrylic adhesive tape meant for strong bondings in inside and outside conditions. Strong Tape Transparent has excellent adhesion to various materials and has great resistance to high- er temperatures as well. The product has a very high bonding strength and is highly water resistant. GENERAL INFORmATION Flexible fixing of different materials - wood, metal, aluminium, glass, PVC, plastics, etc. NB! Not suitable for bonding PE and PP plastics! Basic components acrylic adhesive, red PE protective liner Colour transparent Temperature resistance from -40 ºC to +90 ºC (short-time 4 hours up to +150 ºC) solvent resistance insoluble drying time 30% of total strength in 20 min Full cure 72h maximum tensile strength 75N/cm² Thickness 1,0mm shelf life 12 months in sealed packaging • high bonding strenght • water and moisture proof • Permanently flexible • Transparent TEChNICAL INFORmATION APPLICATIONs INsTRUCTIONs FOR UsE PROdUCT ANd ACCEssORIEs PROdUCT PACKAGE COdE shORT COdE PROdUCT GROUP EAN COdE STRONG TAPE TRANSPARENT 6MM 1 roll NBQ553006 T81 Tapes – STRONG TAPE TRANSPARENT 12MM 1 roll NBQ553012 T81 Tapes – STRONG TAPE TRANSPARENT 19MM 10m roll NBQ553019 T81 Tapes – AUxILIARY PROdUCTs MUlTI ClEAN FOAM 500ml NBQ480050 C20 Cleaning 4742628000548 GASKET REMOvER 400ml NBQ465040 C34 Cleaning 4742628001040 STRONG DOUBlE-SIDED ACRylIC ADHESIvE TAPE STRONG TAPE Strong Tape is grey, strong, double-sided purely acrylic adhesive tape meant for strong bondings in inside and outside conditions. Strong Tape has excellent adhesion to various materials and has great re- sistance to higher temperatures as well. The product has a very high bonding strength and is highly water resistant. GENERAL INFORmATION Flexible fixing of different materials - wood, metal, aluminium, glass, PVC, plastics, etc. NB! Not suitable for bonding PE and PP plastics! • Transport, store and use the product between the temperatures from +10 ºC to +30 ºC. • The surfaces to be glued must be dry, clean and free from dust - clean the surfaces in advance with Multi Clean Foam, if necessary. • Remove the protective liner of the tape and press the tape strongly onto the material. • Then join the surfaces and press evenly to achieve as good adhesion of the materials as possible. • The product achieves its initial gluing strength in 20 minutes and is completely dry after 72 hours. • Heat treatment of the surfaces will speed up the drying time of the product. • Dried tape can be removed with Gasket Remover. NB! In case of complex and silicone-based plastics, use a plastic primer in order to achieve a better adhesion of the materials. Basic components acrylic adhesive, red PE protective liner Colour dark grey Temperature resistance -40 ºC kuni +90 ºC (short-term from 4 hours up to +150 ºC) solvent resistance insoluble drying time 30% of total strength in 20 min Full cure 72h maximum tensile strength 80N/cm² Thickness 0,8mm shelf life 12 months in sealed packaging • high strength bonding • water and moisture proof • Permanently flexible TEChNICAL INFORmATION APPLICATIONs INsTRUCTIONs FOR UsE PROdUCT ANd ACCEssORIEs PROdUCT PACKAGE COdE shORT COdE PROdUCT GROUP EAN COdE STRONG TAPE 6MM 10m roll NBQ550006 T80 Tapes – STRONG TAPE 12MM 10m roll NBQ550012 T80 Tapes – STRONG TAPE 19MM 10m roll NBQ550019 T80 Tapes – AUxILIARY PROdUCTs MUlTI ClEAN FOAM 500ml NBQ480050 C20 Cleaning 4742628000548 GASKET REMOvER 400ml NBQ465040 C34 Cleaning 4742628001040 • Transport, store and use the product between the temperatures from +10 ºC to +30 ºC. • The surfaces to be glued must be dry, clean and free from dust - clean the surfaces in advance with Multi Clean Foam, if necessary. • Remove the protective liner of the tape and press the tape strongly onto the material. • Then join the surfaces and press evenly to achieve as good adhesion of the materials as possible. • The product achieves its initial gluing strength in 20 minutes and is completely dry after 72 hours. • Heat treatment of the surfaces will speed up the drying time of the product. • Dried tape can be removed with Gasket Remover. NB! In case of complex and silicone-based plastics, use a plastic primer in order to achieve a better adhesion to the materials.